Posted by
Numanco Rubber on Friday, February 27, 2009 2:00:00 PM
Chopped
strand are E-Glass fibers that have been chopped into 1/4" (0.25")
or 1/2" (0.5") lengths. They are easily handled and added to a
polyester or urethane resin system to impart strength.
For polyester systems, chopped strand can be used to strengthen edges or
corners. Impact, tensile, compressive and flexural can be increased through the
addition of chopped strand. Cabosil or fiberglass flock should be added as a
thickening agent to the system in order to prevent running of the liquid resin.
APPLICATIONS: In addition to being used as resin filler in polyester, many of
our clients have been successful using this product to impart strength in
urethane systems. Because the chopped
strand fibers will float, it is best to use fillite in the system to
thicken the liquid and prevent fiber floatation. It is not recommended to use
cabosil as a thickening agent in urethane, as it is an easy way for moisture to
enter the system and cause unwanted air bubbles.
Chopped strand is also added to increase the strength of plaster. In the
production of plaster mother molds or cast figures, the inherent brittle nature
of plaster can be avoided by adding chopped E glass fibers for strength.